Pegatah 1 /2/ 4 Port PoE Extender IEEE802.3af poe extender for ip port max extend 120m transmission extender for ip camera

Product overview

1/2/4-Ports PoE Extender has 5 10/100M PoE ports, among them, 1 port for power input, and others for power output. Comply with 10/100BASE-TX, IEEE802.3at (power-in) /IEEE802.3af (power-out). The power input is 25.5W in total. Power output for single port is 15.4W ( max).

PoE Extenders can increase the transmission distance for Ethernet data and PoE power up to 120m via Cat5 UTP cables. It offers you great flexibility to extend the distance of PoE.

Specification

1-Port 10/100M PoE Extender

2-Port 10/100M PoE Extender

4-Ports 10/100M PoE Extender

POE Input: 1 RJ45 Port

PoE Output: 1 RJ45 Port

Network Medium

Cat5 or better UTP cables(≤120m)

Repeater Mode

Store and forward

MAC Address Table

2K

Packet Buffer Memory

48Byte

Switching Capacity

Features

1). Comply with IEEE 802.af Power over Ethernet;

2). 10/100M Supported;

3). Extender the range of PoE an additional 120 meters;

4). Automatically detects and protects PoE equipments from being damaged by incorrect installation;

5). Plug-and Play no configuration required;

6).1Port PoE extender can forward both ethernet and PoE power for 1 terminal equipment via Cat5 UTP cable.

TI-PE4 Port

TI-PE2 Port

PoE Extender is a cost effective way to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as WLAN Access Points and Network Cameras up to a distance of 200m while complying with IEEE PoE and Data standards. The PoE Extender supports 10/100Mbps data rates and delivers 802.3af/at power levels, up to 15.4W, The PoE Extender does not require local power and is powered via the PoE input.Extended PoE installation range by additional 100m Supports 10/100Mbps data rates - Provides 802.3af power levels when powered by any 802.3at source - Extenders can be cascaded to reach up to 700m - Cost effective installation - no need for local power - Plug and play installation - no configuration needed

TI-PE1 Port